manualshive.com logo in svg

Vetter Smartfork, Operating Instructions Manual

Share
Download
Vetter Smartfork Operating Instructions Manual Download Page 11

1.2.6 

VETTER SmartFork

®

 EasySecure, insertion depth function

Fig. 7: VETTER SmartFork

®

 EasySecure

The VETTER Smart

Fork

®

 Easy

Secure

 application in the surface of the fork blade dis-

plays whether the load has been completely picked up or not. It allows for an additional

signal detection via a light scanner mounted in the fork blade. This position is useful to

detect safe crosswise lifting of Euro pallets. As an option, up to 3 positions per fork blade

can be equipped with sensors. When both fork arms are equipped with the sensor, the

occupation of the fork tips is also displayed when insertion into the load is at an angle.

1.2.7 

VETTER SmartFork

®

 Flash, warning function/insertion depth function

Fig. 8: VETTER SmartFork

®

 Flash

 VETTER SmartFork

®

 overview

Overview of applications > VETTER SmartFork® Flash, warning function/insertion depth function

V1.08/2019

SmartFork

®

- The intelligent SensorFork

11

Summary of Contents for Smartfork































































Reviews:

No comments

Brands by name

Popular brands

Load more brands