2.7
Personnel requirements
WARNING!
Risk of injury if personnel are not sufficiently qualified!
If unqualified personnel perform work on the device or loiter in the danger
zone of the device, dangers arise that could cause serious injuries and
significant material damage.
– Have all tasks carried out by personnel qualified to do so without
exception.
– Keep unqualified personnel away from the danger zones.
The following section of this manual stipulates qualifications for personnel in relation to
the various fields of activity:
Driver of industrial trucks
The driver of industrial trucks is capable of operating industrial trucks with a driver’s seat
or a driver’s platform thanks to their education, knowledge and experience. The driver of
industrial trucks is aware of the dangers involved with lifting and transportation tasks.
The driver of industrial trucks has proven their ability to drive industrial trucks with a driv-
er’s seat or a driver’s platform to the operator and has consequently been assigned con-
trol by the operator.
The driver of industrial trucks is familiar with the use of the VETTER Smart
Supply
and
the associated dangers.
Service specialist
The service specialist has a qualification in mechatronics or similar or has verifiably taken
part in training in which the necessary knowledge and procedures for safe performance of
assembly, installation, commissioning and service on the VETTER Smart
Supply
has
been taught.
The service specialist is familiar with the use of the VETTER Smart
Supply
and the asso-
ciated dangers.
The service specialist is capable of operating industrial trucks with a driver’s seat or a
driver’s platform thanks to their education, knowledge and experience. The service spe-
cialist is aware of the dangers involved with lifting and transportation tasks.
Only persons of whom it can be expected that they will carry out their duties reliably are
permitted as personnel. Persons whose ability to react is affected by drugs, alcohol or
medicine, for example, are not permitted.
When selecting personnel, note the age and occupation-specific regulations applicable at
the operation site.
2.8
Personal protective equipment
Personal protective equipment is used to protect persons from safety impairments and
adverse health effects while working.
During the different tasks on and with the device, personnel must wear the personal pro-
tective equipment that is specifically referenced in the individual sections of this manual.
Safety
Personal protective equipment
EN
SmartFork
®
SmartSupply
15
Summary of Contents for SmartFork SmartSupply SF-SUPPLY-V10-00X
Page 2: ...SmartFork SmartSupply 2 EN ...
Page 27: ......