manualshive.com logo in svg

Vetter ManuTel SlimLine, Operating Instructions Manual

The Vetter ManuTel SlimLine comes with an easy-to-use Operating Instructions Manual, providing clear, step-by-step guidance for optimal usage. This comprehensive manual is available for free download at manualshive.com, ensuring that you have all the necessary information to maximize your experience with our innovative SlimLine product.

Share
Download
background image

6.5 

After completion of maintenance work

Personnel:

n

Driver of industrial trucks

Protective equipment:

n

Protective work clothing

n

Industrial helmet

n

Protective gloves

n

Safety shoes

Carry out the following steps upon completion of maintenance work or troubleshooting
and before returning the Manu

Tel

®

 Slim

Line

 and industrial truck to service:

1.

Check that all previously loosened screw connections are seated securely.

2.

Reset the lift truck fuse.

3.

Ensure that all tools, materials and other equipment have been removed from the

work area.

4.

Clean the work area and remove any leaked materials such as e.g. liquids, pro-

cessing materials or similar.

5.

Ensure that all safety equipment functions faultlessly.

 Maintenance

After completion of maintenance work

V1.09/2019

ManuTel

®

 telescopic fork arm Type SlimLine

36

Summary of Contents for ManuTel SlimLine












































Reviews:

No comments

Related manuals for ManuTel SlimLine

Brands by name

Popular brands

Load more brands