STOR-96 and 912-G-W-1RH 0116
Copyright 2016 Vestil Mfg. Co.
Page 11 of 15
Place a ROOF WALL SUBASSEMBLY over one half of the shed. The perimeter flange of the ROOF WALL
SUBASSEMBLY must be on the outside of the wall panels. Pull/tap the ROOF WALL down until the ROOF
WALL seats on the tops of the supporting wall panels. Install the second ROOF WALL SUBASSEMBLY in the
same way.
Install the short arm of the FORMED ROOF SEAM ANGLE PIECE (8) between the roof panels (3); then
install the ROOF SEAM COVER PLATE (9) over the angle piece.
Fasten the ROOF SEAM COVER PLATE to roof and walls with 4 self-tapping screws. (2 screws at each end of
the cover plate)
NOTE: Some shed kits combine parts 8 & 9 into a single welded cover plate. Insert the projection on the
underside of the welded cover plate into the space between the roof panels.
Perimeter flange
