Rev. 1/3/2017
FTTM-2, MANUAL
Copyright 2017 Vestil Manufacturing Corp.
Page 1 of 6
FTTM-2
Instruction Manual
Receiving instructions:
After delivery, IMMEDIATELY remove the packaging. Inspect the product closely to determine whether it
sustained damage during transport. If damage is discovered, immediately record a complete description
of the damage on the bill of lading. If the product is undamaged, discard the packaging.
NOTES:
1) Compliance with laws, regulations, codes, and non-voluntary standards in the location where the
product is
used
is exclusively the responsibility of the end-user.
2) VESTIL is not liable for any injury or property damage that occurs as a consequence of failing to apply
either: a) Instructions in this manual; or b) Information provided on labels affixed to the product.
Vestil is not responsible for incidental or consequential damages caused by failure to apply the
instructions in this manual.
V
ESTIL
M
ANUFACTURING
C
ORP
.
2999 North Wayne Street, P.O. Box 507, Angola, IN 46703
Telephone: (260) 665-7586 Toll Free: (800) 348-0868
Fax: (260) 665-1339
www.vestilmfg.com e-mail:
Table of Contents
Signal Words….……………………..……………………………………………………………………………………….. 2
Hazards of Improper Use…..……………………………………………………………..………………………………… 2
Specifications…………………………………………………………………………………………………………………. 3
Exploded parts diagram & bill of material…………...…………….………………………………………………………. 3
Use Instructions………………………………………………………………………………………………………………. 4
Inspections & Maintenance…………………………………………………………………………………………………. 4
Labeling Diagram……...…………………………………………………………………………………………………….. 5
Limited Warranty…...………………………………………………………………………………………………………… 6
