Vestil EHLTP-4864-2-60-D2, Manual

Page: 3 / 12

Table of Contents Rev. 9/10/2020 EHLTP-4864-2-60-D2 MANUAL
Table of Contents Copyright 2020 Vestil Manufacturing Corp. Page 3 of 12
Proper use and maintenance are essential for this product to function properly.
•
Periodically lubricate pivot points with bearing grease.
• Keep the product clean & dry. Store this cart indoors.
• Only use manufacturer-approved replacement parts. Order replacement/spare parts for this equipment by
contacting the TECHNICAL SERVICE DEPARTMENT .
• DO NOT use brake fluid or jack oils in the hydraulic system. If oil is needed, only use an anti-wear hydraulic oil
with a viscosity grade of 150 SUS at 100°F, (ISO 32 cSt @ 40°C), or Dexron transmission fluid.
• Contact the manufacturer for SDS (Safety Data Sheet) documentation
EXPLODED VIEW (CORRESPONDING BILL OF MATERIALS ON PAGE 4)
NOTICE
HYDRAULIC CIRCUIT DIAGRAM
NOTE: Perimeter
toeguard not shown