Vestil EHLTP-4864-2-60-D2, Manual

Page: 11 / 12

Table of Contents Rev. 9/10/2020 EHLTP-4864-2-60-D2 MANUAL
Table of Contents Copyright 2020 Vestil Manufacturing Corp. Page 11 of 12
Maintenance” section.
Platform lowers too quickly. Flow control valve spool sticking.
Remove and inspect valves. Clean per
instructions in “Inspection and
Maintenance” section.
LABELING DIAGRAM
The unit should be labeled as shown in the diagram. However, label content and location are subject to
change so your product might not be labeled exactly as shown. Thoroughly photograph the unit when you first
receive it as discussed in the RECORD OF SATISFACTORY CONDITION section of this manual. Make sure that
your Record includes a photograph of each label. Modify this diagram, if necessary, to indicate labeling actually
applied. Replace all labels that are, damaged, missing, or not easily readable (e.g. faded). Contact the
TECHNICAL SERVICE / REPLACEMENT PARTS DEPARTMENT online at https://www.vestil.com/page-parts-
request.php . You may also call (260) 665-7586 and ask the operator to connect you to the TECHNICAL
SERVICE / REPLACEMENT PARTS DEPARTMENT.
A
B
C
D
E
F
A: Label 824
B: Label 269
H
C: Label 287
D: Label 208
E: Label 295 F: Label 212
G: Label 206 (on oil tank; not shown in diagram)
H: Label 223
G