Operator’s Manual
2/2/21
EHLT, MANUAL.DOCX
Copyright 2020, Vestil Manufacturing Corp.
Page
23
of
24
LABELING DIAGRAM
The lift table should be labeled as shown in the diagrams. However, label content and location are subject to change so
your product might not be labeled exactly as shown. Thoroughly photograph the lift table when you first receive it as
discussed in the Record of Satisfactory Condition section on p. 16. Make sure that your record includes a photograph of
each label. Replace all labels that are or later become damaged, missing, or not easily readable (e.g. faded).
To order replacement labels, contact the technical service and parts department online at
http://www.vestilmfg.com/parts_info.htm. Alternatively, you may request replacement parts and/or service by calling
(260) 665-7586 and asking the operator to connect you to the Parts Department.
