Vestil E-TUG, Instruction Manual, Page: 6 / 7

Table of Contents Rev. 2/8/2019 E-TUG MANUAL
Table of Contents Copyright 2019 Vestil Manufacturing Corp. Page 6 of 7
LABELING DIAGRAM:
The unit should be labeled as shown in the following diagram. However, label content and location
are subject to change without notice so your product might not be labeled exactly as shown.
Thoroughly photograph the labels applied to the unit when you first receive it as discussed in the
Record of Normal Condition on p. 5. Replace all labels that are damaged, missing, or not easily
readable (e.g. faded). Contact the technical service and parts department online at
http://www.vestilmfg.com/parts_info.htm
to order replacement labels. Alternatively, you may request
replacement parts and/or service by calling (260) 665-7586 and asking the operator to connect you to
the Parts Department.
A
B
C
D
E
A: Label 295
B: Label 527
C: Label 656
D: Label *287 (Model; serial/order
no.; capacity)
*NOTE: There are several forms of
label 287. The label applied might
look different than the example.
E: Metal data tag