Rev. 7/10/2018
MANUAL
Copyright 2018 Vestil Manufacturing Corp. Page 1 of 4
DTD–24 DRUM TIE DOWN
INSTRUCTION
MANUAL
Receiving instructions:
After delivery, remove the packaging from the product. Inspect the product closely to determine
whether it sustained damage during transport. If damage is discovered, record a complete description of
it on the bill of lading. If the product is undamaged, discard the packaging.
NOTE:
The end-user is solely responsible for confirming that product design, use, and maintenance comply
with laws, regulations, codes, and mandatory standards applied where the product is used.
Replacement Parts and Technical Assistance:
If you have questions that are not addressed in these instructions and to order replacement parts,
labels, and accessories, call (260) 665-7586 and ask for the Service and Parts Department. The
department can also be contacted online at
http://www.vestilmfg.com/parts_info.htm
.
Vestil Manufacturing Corp.
2999 North Wayne Street, P.O. Box 507, Angola, IN 46703
Telephone: (260) 665-7586 -or- Toll Free (800) 348-0868
Fax: (260) 665-1339
Web:
www.vestilmfg.com
e-mail:
Table of Contents
Signal Words……………………………………………….………………………………………………………… 2
Hazards of Improper Use……………………………………………………..………………………….………… 2
Using the Product……………………………………………………………………………………………………. 2
Inspections and Maintenance……………………………………………………………………………………… 3
Labeling Diagram.…………..
………………………………………..…………….............................................. 3
Limited Warranty…………………………………………….………………………………………………………. 4
