Vestil DLH-CL2-1, Instruction Manual

Page: 6 / 7

Table of Contents 5/4/2020 DLH-CL2-1 MANUAL
Table of Contents Copyright 2019 Vestil Manufacturing Corp. Page 6 of 7
LABELING DIAGRAM
The unit should be labeled as shown in the diagrams. However, label content and location are subject to change so
your product might not be labeled exactly as shown. Thoroughly photograph the unit when you first receive it as
discussed in the Record of Satisfactory Condition section on p. 4. Make sure that your record includes a photograph of
each label. Replace all labels that are, or later become, damaged, missing, or not easily readable (e.g. faded). To
order replacement labels, contact the technical service and parts department online at
http://www.vestilmfg.com/parts_info.htm . Alternatively, you may call (260) 665-7586 and ask the operator to connect
you to the Parts Department .
SPECIFICATIONS
Dimensions, capacity, net weight, and center of gravity figures are provided in the following diagrams and table.
Drawing 40-007-112
C
B
A
Model
Overall
width
Overall
Length
Overall
Height
Center of Gravity
Capacity Net Weight
Vertical Horizontal
DLH-CL2-1
16
15
/
32
”
41.8 cm
17
1
/
8
”
43.5 cm
30
7
/
16
”
77.3 cm
10
3
/
16
”
25.9 cm
5
1
/
2
”
14.0 cm
1,000 lb.
454.5 kg
92 lb.
41.8 kg
Dimension tolerance = ±
1
/
4
”
A: Label 287 – Applied to front of back plate
B: Label 485 – Applied to front of back plate
C: Label 1049 – Applied to front of back plate