30
■
Maintenance and Anomaly Handling
Sparks from the Discharge Needle
There should be no visible sparks from the static elimination device system during normal use. If you
see these kinds of sparks continuing to occur at the discharge needle, etc., make sure to perform
necessary maintenance such as cleaning the connected needle electrode. If cleaning cannot eliminate
the occurrence of sparks, stop the supply of power to the body part and contact the dealer from which
the product was purchased.
Other Anomalies
If any of the following phenomena occur, immediately stop the supply of power to the body part and
contact the dealer from which the product was purchased.
•
Sparks are being emitted due to damage to the antistatic electrode or the high voltage cable.
•
The high voltage connector portion or a part of the high voltage cable is melted, smoking or
burning.
•
A strange smell is coming from the body part. Or, it is making an unusual humming sound (which
can be heard from 1 m away).
•
The body part is considerably distorted. Or, it is abnormally hot. (enough that it cannot be touched
with bare hands)
•
Pilot lamp doesn’t turn on even main switch has been on.
Caution
PROHIBITED
Do not use the product in the following conditions. Risk of fire or electric shock.
•
The product is broken due to dropping or shock.
• The power indicator light does not come on even though the power switch is
turned to ON.
• The cord is damaged or heated up.
• The plug to the connector or outlet is loose.
Power off
When any abnormal condition is detected, turn off the power switch and pull out
the power supply connector.
Prohibition of
disassembly
Never disassemble the product.
Continuously using the product during failure or abnormal conditions may lead to product breakdowns
or accidents, so please request repairs in a timely manner. Contact the dealer from which the product
was purchased for repairs.
Summary of Contents for StatClean GP-1
Page 5: ...5 外観寸法 ...
Page 6: ...6 回路ブロック図 ...
