VESPA S 150 2008, Manual, Page: 53 / 82

03_28
03_29
03_30
Head light adjustment (03_29, 03_30)
Proceed as follows:
1 . Place the vehicle in running order and with the tyres inflated to the prescribed pres-
sure, on a flat surface 10 m away from a white screen situated in a shaded area,
making sure that the longitudinal axis of the vehicle is perpendicular to the screen;
2 . Turn on the headlight and check that the borderline of the projected light beam on
the screen is no higher than 9/10 or lower than 7/10 of the distance from the ground
to the centre of the vehicle's headlamp;
3 . If otherwise, adjust the right headlight with screw « A ».
N.B.
THE ABOVE PROCEDURE COMPLIES WITH THE EUROPEAN STANDARDS RE-
GARDING MAXIMUM AND MINIMUM HEIGHT OF LIGHT BEAMS. REFER TO THE
STATUTORY REGULATIONS IN FORCE IN EVERY COUNTRY WHERE THE VE-
HICLE IS USED.
53
3 Maintenance