03_33
03_34
Rear optical unit (03_33, 03_34)
To replace the rear light bulb:
1.
Remove the two screws «
A
».
2
. Take out the bulb holder «
B
» from its fitting by turning it anticlockwise.
3
. Press the bulb, turn it anticlockwise and then take it out.
To refit, proceed in reverse order.
N.B.
IF MISTING IS NOTICED ON THE INSIDE OF THE HEADLAMP GLASS, THIS
DOES NOT INDICATE A FAULT AND IS RELATED TO THE HUMIDITY AND/OR
TO LOW TEMPERATURES.
THE PHENOMENON SHOULD QUICKLY DISAPPEAR WHEN THE LIGHT IS
SWITCHED ON.
THE PRESENCE OF DROPS OF WATER, ON THE OTHER HAND, COULD INDI-
CATE THAT WATER IS INFILTRATING. CONTACT THE PIAGGIO AFTER-SALES
SERVICE NETWORK.
03_35
Rear turn indicators (03_35, 03_36)
To replace the bulbs:
1.
Remove the turn indicator from its fitting by undoing the screw «
A
».
2.
Take out the bulb holder «
B
» from its fitting by turning it anticlockwise.
3.
Press the bulb, turn it anticlockwise and then take it out.
To refit, proceed in reverse order.
49
3 Maintenance
Summary of Contents for S 125
