Fig. 16 - Engine bonnet removal
1. Engine bonnet blocking lever - 2. Front dowel - 3 Fixing hook - 4. Hooked pivot.
For access to the engine
, take off the engine bonnet: proceed as follows.
- Pull the lever « 1 » (Fig. 16) and turn it so as to release it from the bonnet. Then move
the bonnet slightly outwards, until front dowel « 2 » disengages from the hole on the
frame.
- Push the bonnet from the front, upwards and turn (see position indicated by dotted line),
thus releasing the fixing hook « 3 » from the frame.
- Move bonnet outwards round its hooked pivot « 4 » until the latter disengages from the
hole on frame. The bonnet is thus removed.
For re-assembly, reverse the procedure.
Summary of Contents for 1962 150
