Vescent SLICE-DHV, Quick Start Manual

Page: 16 / 20

Last update: 2021/08/26 14:26 slice:dhv https://www.vescent.com/manuals/doku.php?id=slice:dhv
https://www.vescent.com/manuals/ Printed on 2021/08/30 08:42
possible.
Programmable Input & Output
The SLICE-DHV has two programmable inputs (labeled A & B, bubble 7 in figure 2 ) and two
programmable outputs (labeled 1 and 2, bubble 12 in figure 2 ) on the front panel. It also has a rear-
panel trigger input and trigger output. Touching the I/O icon on the control bar will open a screen
similar to that seen in
figure 22
Fig. 22: I/O programming window
Programmable Input
From figure 22 , it is possible to assign the front-panel input as the source of the modulation/control
input signal (normally assigned to the SMA connector on the rear panel of the SLICE-DHV). Touching
the A Input field displays the menu seen in
figure 23 . From here, rear-panel modulation input (default;
blank field) or front-panel modulation can be selected.
Fig. 23: I/O programming window