ACCESS LEVELS
Standby Mode
Standby mode indicates that they Enable Keyswitch has not be activated. The LCD screen will display the
following:
Specific functions are restricted when operating the unit in the standby, however this level allows users to
perform simple tests. It also provides options for testing LED indicators of the fascia as well as color composition
of the LCD panel GUI.
Access Level 2
Insert the key in the Enable Access keyswitch and turn it to the right to obtain Access Level 2. XT+ releasing
modules will ignore Enable Access commands from the Elite RS panel and will enter access level 2 only when
their own Enable Access switch is operated. When the Enable Access keyswitch is turned, the XT+ LCD menu
will display:
Press
Enter
to disable the extinguishant release outputs. The Disablement and
Supervisory LEDs will illuminate and the buzzers will sound on the XT+ module and the
Elite RS FACP.
WARNING!
Disabling the Extinguishant Release from this menu is not UL or
NFPA Compliant for non-water based releasing service. For non-water based
releasing service, use of a Disablement Switch (VF1832-xx) is required for
compliance with these standards.
Press
Enter
to re-enable the outputs and restore the Disablement and Supervisory
conditions.
Access Levels
VES Fire Detection Systems
XT+ Releasing Control Unit Installation Manual
Version 1.00 | December 2018 | MAN-1252VES
Page 31