Front-Panel Menu 4
VES, LLC
Elite-RS Panel Installation Manual
VF3529-00, Revision E01.03
H-Series
50 of 146
Disable Addresses
Any loop device can be disabled using this menu option. Sub-addresses may be individually disabled when using
devices with more than one input or output.
When a device is disabled, the Elite-RS Panel ignores the analog value reported by the device. All other faults for the
device such as missing device, double address, internal fault, type changed and bad data are still reported by the
Elite-RS Panel.
Disable Audible Devices
This menu option disables all audible device outputs connected to the control panel. An audible device output is
defined as any output that has been set to respond to Silence and Evacuate panel commands. Audible device outputs
may be directly wired to NAC 1 and NAC 2 or loop driven devices.
The NAC Trouble indicator will be illuminated, as well as the Point Bypassed Indicator.
Disable Panel I/O
This menu option disables or enables panel input and output functions. Timed disabling can be set to occur between
30 minutes to 24 hours. Un-timed disabling can be set to occur indefinitely.
Panel Inputs
Panel Outputs
Programmable
Default = Enabled
Disables or enables the front-panel Programmable Function button.
Fire Drill
Default = Enabled
Disables or enables the front-panel Fire Drill button.
NAC 1
Default = Enabled
Disables or enables NAC 1 on Terminal X1 of the Main Board. To set
these parameters using the Elite-RS Panel Front-Panel Menu:
1 Select ACCESS LEVEL 2
2 Select ACCESS LEVEL 3
3 Select EDIT CONFIGURATION
4 Select EDIT PANEL I/O
5 Select EDIT PANEL OUTPUTS
6 Scroll through the options for NAC CIRCUIT 1
NAC 2
Default = Enabled
Disables or enables NAC 2 on Terminal X1 of the Main Board. To set
these parameters using the Elite-RS Panel Front-Panel Menu:
1 Select ACCESS LEVEL 2
2 Select ACCESS LEVEL 3
3 Select EDIT CONFIGURATION
4 Select EDIT PANEL I/O
5 Select EDIT PANEL OUTPUTS
6 Scroll through the options for NAC CIRCUIT 2
