Installation 3
VES, LLC
Elite-RS Panel Installation Manual
VF3529-00, Revision E01.03
H-Series
42 of 146
Clearing the Event Log
The Clear Event Log feature removes the event log from Elite-RS Panel memory.
To clear the event log:
10
Press 3 on the upper-control-pad to scroll down the list of event types.
11
Press 2 on the upper-control-pad to display the event type.
Event logs are not displayed when events are shown with zeros in
“SELECT EVENT TYPES TO VIEW”.
An example of a pre-alarm condition is shown below:
VIEW PRE-Alarm EVENTS 001/016
*PRE-Alarm: HEAT SENSOR ZONE 02 *
ADR=011.00 Loop=2 ND=1 AUTOLEARN
TIME 10:35 02/18/2004
Pre-Alarm
Use UP/DOWN arrow keys to scroll events
12
Press 4 on the upper-control-pad to go back or press Exit to quit.
1
Press 3 on the upper-control-pad to display the SET ACCESS LEVEL 2 MENU.
SET ACCESS LEVEL 2 MENU
Enter Access Level 2 Password
Use numbered arrow keys
*****
Access will automatically expire after
120 seconds if no key is pressed.
ENTER TO PROCECEED – EXIT TO QUIT
2
Type the five digit code in the password field and press Enter.
The default password is 22222.
3
Press 3 on the upper-control-pad to display the MAIN MENU.
MAIN MENU – V07.0007H
>DISABLEMENTS
VIEW DeviceS
TEST ZONES
SET SYSTEM TIME
SENSOR MAINTENANCE EARLY WARNING
ACCESS LEVEL 3
