5
To select your local time zone:
To set the date:
You can enable your Vertu phone to automatically
adjust your date and time settings.
D I S P L A Y I C O N S A N D I N D I C A T O R S
The display shows the current status of your Vertu
phone.
S TA T U S I C O N S
One or more of the following icons may appear on
the stand-by display below the battery charge and
signal strength indicators.
Some icons only appear if your SIM card has two
lines enabled. For more information contact your
service provider.
In call icon
The in call icon appears on the right of the display
when you are in a call.
Call status indicators
While you are in a call some of the following icons
may appear beside the caller name or number on
the display.
>
Scroll to the
appropriate time
zone.
>
Press
S e l e c t
. The
date screen is
displayed.
>
Use the
N U M B E R
keys to key in
the date.
>
Use the
S C R O L L
keys
to move between the
figures.
>
Press
O K
. A
confirmation
message is
displayed.
If the battery is removed from your Vertu
phone for longer than two hours, you may
need to set the time and date again.
The battery charge and
signal strength indicators
appear at the top of the
display.
Indicates the signal
strength of the network at
your current location.
Indicates the battery
charge level.
Indicates that both battery
and signal levels are at full
strength.
Indicates that both battery
and signal levels are
below full strength.
Indicates that the signal
strength at your current
location is too weak to
make calls and your
battery is critically low.
You are currently in a call.
The call is active.
The call is on hold.
The caller has disconnected the call.
Summary of Contents for Signature RHV-2
Page 1: ...REFERENCE MANUAL ...
Page 52: ...44 ...