Vertiv VP7811B Manual Download Page 35 | Manualshive

Page: 35 / 79

Vertiv VP7811B Manual Download Page 35

Vertiv Intelligent Rack PDU

Page 35

5. CHAPTER 3 - SETUP

5.1. INTERCHANGEABLE MONITORING DEVICE

The Interchangeable Monitoring Device (IMD) is the core behind the Vertiv Upgradable line of power prod-
ucts. The IMD can be replaced and upgraded to allow data-centers to future-proof their locations.

Basic

The Basic Vertiv Upgradable PDU is the baseline for the GU line of products. It is built with the IMD-

01

X

module, and provides low cost power distribution with the option to upgrade to add local metering and/or
remote monitoring and other features in the future.

Metered

The Metered Vertiv Upgradable PDU is a locally metered option for the GU line of products. It is built with
the IMD-

01

D module, and provides a local display for viewing current draw (Amps) and power (Kilowatts),

with the option to upgrade to add monitoring and other features in the future.

Figure 3-1

IMD-

01

D Module

1.

Local Display

: The local display will display the phase, line, and circuit current values (in Amperes).

2.

Display Buttons

: There are three buttons near the IMD display; a back button, a forward button, and a

center button. The functions of these buttons are as follows:

«
...
33
34
35
36
37
...
»

Summary of Contents for VP7811B
















































































Reviews:

No comments