Vertiv VP7811B Manual Download Page 14 | Manualshive

Page: 14 / 79

Vertiv VP7811B Manual Download Page 14

Vertiv Intelligent Rack PDU

Page 14

3. CHAPTER 1 - PRODUCT SPECIFICATIONS

3.1. PRODUCT SPECIFICATIONS

3.1.1. OVERVIEW

The Vertiv Upgradeable (GU) PDU gives data center managers the flexibility to install the intelligence re-
quired today, with the option to upgrade technology as needs evolve. From basic power to power monitor-
ing, the Vertiv Upgradeable product line adapts to a business' needs now and in the future.

To establish this upgrade path, Vertiv engineers took the robust PDU design and incorporated an Inter-
changeable Monitoring Device (IMD). Vertiv PDUs last for many years, and with the IMD design, busi-
nesses will be able to upgrade their PDUs to newer monitoring technologies in the future without having to
replace the entire PDU. The hot-swappable IMD can be changed out in a few simple steps, without inter-
rupting power to critical servers.

3.1.2. ENVIRONMENTAL

The operational environmental limits pertaining to Temperature, Humidity and Elevation are as
defined below.

3.1.2.1. TEMPERATURE

Table 1-1

Temperature Limits

Minimum

Maximum

Operating

10°C (50°F)

45°C (113°F) (standard models)

60°C (140°F) (high temperature models)

Storage

-25°C (13°F)

65°C (149°F)

«
...
12
13
14
15
16
...
»

Summary of Contents for VP7811B
















































































Reviews:

No comments