Vertiv
|
NetSure™ SCC Controller User Manual (UM1M520HNA)
|
Rev. H
28
Downloading and Uploading the SCC Controller Configuration File
To upload the controller configuration file from the controller to a local server, press the
Upload
button. Select
a location to save the file to.
To download a controller configuration file from a local server into the controller, select the file to download
using the
Browse
button, then press the
Download
button. Press
OK
to load the file into the controller. Press
the
Back to the Homepage
button.
Downloading Firmware into the SCC Controller
Press the
GO TO FIRMWARE DOWNLOAD MODE
button. Select
OK
. The following window opens.
Figure 4:
Firmware Download
To download a firmware file from a local server into the controller, select the file to download using the
Browse
button, then press the
Download
button to load the file into the controller. Press the
Start Application
button
then
OK
to start the controller with the file downloaded into the controller.
NOTE!
Filename should be in the below convention:
SCC_APPV***.bin
(*** represents the version number. For example, SCC_APPV206.bin for version 2.06).
Summary of Contents for NetSure SCC
Page 8: ...Vertiv NetSure SCC Controller User Manual UM1M520HNA Rev H 8 This page is intentionally blank...
Page 35: ...Vertiv NetSure SCC Controller User Manual UM1M520HNA Rev H 35 This page is intentionally blank...
Page 36: ...Vertiv com Vertiv Headquarters 1050 Dearborn Drive Columbus OH 43085 USA UM1M520HNA RH 10 19...
