Vertiv
|
NetSure Monitor Unit User Manual (UM1M832DNA)
|
Rev. C
61
Standard Distribution Panel Settings Web Page
Click
in
to go to the Standard Distribution Panel Settings Web Page. Click the X to close the
window and go back to the Standard Distribution Panel Web Page.
To change a programmable parameter, select or enter a new value for the parameter then click on “Set” to
change the value.
Figure 24:
Standard Distribution Panel Settings Web Page
•
Panel Full Name: Name displayed in the Web Interface menus.
•
PaneL Abbr Name: Name displayed in the local display menus.
•
Feed ID: Assigned which input feed is connected to the distribution panel. Note: Program the "Feed ID"
for panels starting from panels at the top, to the panels at the bottom.
•
Panel Exists: Select “Used” or “Not Used”.
•
Panel Type: Select “Standard” or “Advanced”.
•
Num of Distribution Elements: Enter the number of distribution devices that are installed in the
distribution panel.
•
Clear All Data: Clears the data stored for the panel.
