Vertiv
™
NetSure
™
-48 VDC Power System
System Application Guide
Spec. No: 582140001
Proprietary and Confidential © 2022 Vertiv Group Corp.
SAG582140001
Model No: 801
NLDB
, 801
NLEB
, 801
NL
-
B
Page 39
Revision T, September 28, 2022
Wiring Components
Load Distribution Wire Sizes and Lugs Selection (Distribution Bay)
Features
♦
Load distribution leads are connected as described in the section titled
under "Accessory
Descriptions".
♦
For lug mounting hole size and spacing dimensions, refer to the illustrations in the section titled
under "Accessory Descriptions".
Restrictions
All lugs for customer connections must be ordered separately.
Ordering Notes
1)
The type of distribution device determines the load lug hole size and spacing requirements. The rating of the
distribution device determines the wire size requirements. For wire size and lug selection; refer to Table 9 and Table 10
(Load Side). (Load return leads are terminated outside the bay to customer provided return busbars.)
2)
Lugs should be crimped per lug manufacturer’s specifications.
