SAG582120600
System Application Guide
Revision BK, September 27, 2017
Spec. No. 582120600 (Model 801DB
NVGB
)
Page 26 of 75
ACCESSORY DESCRIPTIONS
Load Lug Hardware Kits
Features
♦
These kits provide hardware for connecting customer-furnished Load and Load Return (internal full-length ground bar
only) lugs.
•
Part No. 547682 kit provides (35) each of 1/4” flat washers, 1/4” lock washers and 1/4-20 hex nuts.
•
Part No. 547683 kit provides (60) each of 1/4” flat washers, 1/4” lock washers and 1/4-20 hex nuts.
♦
All hardware is shipped loose in bags.
Restrictions
Does not provide
input
lug hardware.
Does not provide lug hardware for
panel length
ground/return bars (List 117, 127).
Ordering Notes
1)
Order as required. The table shows the quantity required for each assembly.
For
Each
of the
Following List
Numbers Ordered
Order This Kit Quantity
Kit P/N 547682 Kit P/N 547683
110
0
N/A
115
1
N/A
116
8
N/A
120
N/A
0
125
N/A
1
126
N/A
6
Side by Side Busbar Link Kit for Use with List 110 and List 120, P/N 556103
Features
♦
Connects each side of a List 143 or List 144 together, side by side, in a List 106 or List 108 bay using List 120 or List 110
distribution panels. Provides two positions to terminate up to four (4) 750 MCM cables.
Restrictions
For use with List 106 with List 120 and List 108 with List 110.
Ordering Notes
1)
Order P/N 556103 for List 143 or List 144 as required (see restrictions above and illustration on next page).
Side by Side Busbar Link Kit for Use with List 115 and List 125, P/N 557256
Features
♦
Connects each side of a List 143 or List 144 together, side by side, in a List 106 or List 108 bay using List 125 or List 115
distribution panels. Provides two positions to terminate up to four (4) 750 MCM cables.
Restrictions
For use with List 106 with List 125 and List 108 with List 115.
Ordering Notes
1)
Order P/N 557256 for List 143 or List 144 as required (see restrictions above and illustration on next page).
