Vertiv™ XTE 601E Series Equipment Enclosures Description and Installation Manual
Proprietary and Confidential © 2022 Vertiv Group Corp.
73
•
External intrusion alarm (if silenced) re-activates.
•
All fans turn on.
•
Thermal control is restored.
Table 15.1
ECU Display Codes and Alarm Relays
Description
External Alarm Relay
ECU Display Code
Controller OK
- -
UP
Product Code
- -
PC
Product Code
(follows PC)
(xxx = 000-999)
--
xxx
Firmware Code (revision)
- -
FC
Firmware Code (revision)
(follows FC)
(N = 0-9)
- -
N.N.N.
Door Open (software does not treat as alarm resulting in a system
fault condition)
2
d01
Door Ajar (software does not treat as alarm resulting in a system
fault condition)
2
d02
Maintenance Mode
2
d03
Equipment Compartment Thermistor Failure (Note: E07 and E12
inhibited)
1
E01
Equipment Compartment Thermistor 2 Failure
1
E02
Thermistor Connected to Unused Port
n/a
E03
Thermistor Connected to Unused Port
n/a
E04
Thermistor Connected to Unused Port
n/a
E05
Equipment Compartment High Temperature
(Note: inhibited by E01)
3
E07
Battery Box High Temperature
(Note: inhibited by E02)
3
E08
Equipment Compartment Low Temperature
(Note: inhibited by E01)
3
E12
Low Voltage TEC Disconnect
1
E17
Fan Fail HX Internal #1
1
F01
Fan Fail HX Internal #2
1
F02
Fan Fail HX External #1
1
F03
Fan Fail HX External #2
1
F04
