Vertiv™ XTE 601E Series Equipment Enclosures Description and Installation Manual
Proprietary and Confidential © 2022 Vertiv Group Corp.
51
12
Alarm Wiring
12.1
Connecting External Alarms
An alarm block is provided for the following purpose.
•
Enclosure Alarms
Refer to Figure 12.1 and Figure 12.2 for location.
F2019015 and F2019016: The alarm block is a 50 Pair split center block. Column A is internally connected to column B and Column C
is internally connected to column D. Terminate alarms on column A.
12.1.1
Enclosure Alarms
All alarms for customer connections are brought out to an alarm block. Refer to Figure 12.1 and Figure 12.2 for location and pinouts.
12.1.2
Typical Battery Alarm Wiring
Refer to Figure 12.3.
NOTE!
F2019015 and F2019016 battery alarms are configured for two (2) battery strings as shipped from the factory. If only
one (1) battery string is utilized, the 2nd circuit breaker will produce an alarm when turned off. See alarm schematic (Figure
12.1 or Figure 12.2) for details on how to reconfigure for one (1) battery string.
