Safety Information
590-2106-501A/SL-29421/4200-099
1
1.
Safety Information
1.1
General
The protective features of this product may be damaged if it is used in a manner not specified in the
operation/installation instructions. This manual describes the general installation of the system. If the
system has features or accessories not described in this manual, contact Vertiv.
The following general safety precautions must be observed during all phases of operation, service, and
repair of this product. Failure to comply with these precautions or with specific WARNINGS elsewhere
in this manual violates safety standards of design, manufacture, and intended use of the product.
Vertiv assumes no liability for the customer's failure to comply with these requirements.
Note
•
Use safety equipment when working in and around the batteries.
•
Notice the system’s external markings de
scribed under Safety Symbols, page 2.
•
Never energize the UXIM/UXTM until after the installation is complete.
•
Never exceed equipment voltage, power ratings or capabilities.
1.2
Document Symbols
The symbols below appear in this manual or are affixed to the Vertiv device. It is important to review
these symbols and to understand the type of instructional information they convey.
Warning
Highlights areas related to user safety.
Calls attention to a procedure, practice, or condition which, if not correctly followed,
could result in personal injury. Do not proceed beyond a Warning symbol until the
indicated conditions are fully understood and met. Always observe safety information
when installing, setting up or operating this product.
Caution
Highlights areas related to product or data safety.
Calls attention to an operating procedure or condition which, if not correctly followed,
could result in damage to the product or permanent loss of data. Do not proceed
beyond a Caution symbol until the indicated conditions are fully understood and met.
Note
The Note symbol calls attention to important information.
Describes additional information to help the user.
