Vertiv™ NetSure™ IPE Series -48 VDC Outdoor Rectifier Installation and User Manual
Proprietary and Confidential © 2022 Vertiv Group Corp.
54
3.7
Digital Output (DO) Relay Functions
Refer to “Digital Output (DO) Dry Relay Contacts” on page 12.
3.8
Changing the Alarm Relay Configuration for the Digital Output (DO)
Relay Functions
The alarm relay contact configurations can be changed. Refer to the following procedure.
Procedure
1.
Refer to “Opening / Closing the Front Access Panel” on page 75, and open the rectifier enclosure front access panel.
2.
Locate jumpers JP1, JP2, JP3, and JP4. Set the jumpers per site requirements. See Table 1.12 on page 12 and Figure 1.6
on page 12.
3.
Refer to “Opening / Closing the Front Access Panel” on page 75, and close the rectifier enclosure front access panel.
