
Connecting the Wave IP 500 Server to power and powering on
3
-
12
Chapter 3: Setting Up the Wave IP 500 Server
Wave Server Installation Guide
Connecting the Wave IP 500 Server to power and powering on
Connect the Wave Server to a dedicated circuit using the supplied power cord. Do not use any
other power cord.
Note:
There are 2 power cord models, one for use in the US and one for International (EU) use.
See Appendix D in the
Wave Hardware Reference Guide
for voltage and current specifications.
If you are using digital phones on the Wave IP 500, you must also connect the external power
supply used to power the phones. The external power supply does not require a dedicated
circuit. Be sure you are using the correct external power supply for your digital phone
configuration. See “External power supply for digital phones” on page 3-6 for more
information.
To connect the Wave Server to power and power on:
1.
Locate the power outlet and power toggle switch on the back of the Wave Server.
2.
Set the power supply rocker switch to the off position.
3.
Connect the power cable to a dedicated circuit.
4.
If you are using an external power supply to support digital phones, locate the connector
to the right of the ground lug.
Release 4.0
June 20, 2013
Summary of Contents for WAVE IP 2500
