Vertical WAVE IP 2500 Installation Manual Download Page 36

Page: 36 / 236

About the Wave IP 500 Server

Chapter 3: Setting Up the Wave IP 500 Server

Wave Server Installation Guide

About the Wave IP 500 Server

The Wave IP 500 Server consists of the following components. Each is described in the
following sections.

•

Wave Server chassis components. See the next section.

•

Power supply. See page 3-5.

•

Expansion options, including expansion modules and the Media Resource Module
(MRM). See page 3-6.

Important:

Note that a monitor, keyboard, and mouse are not included with and are not

supported on the Wave Server. You use the administrator PC, described in Chapter 5, to
configure and manage the Wave ISM.

Maximum phone capacity

The Wave IP 500 Server supports the following:

•

A maximum of 50 analog, digital, and SIP phones in a mixed configuration.

•

A maximum of 50 SIP phones in a SIP-only configuration (with no digital or analog
phones)

•

A maximum of up to 48 digital phones in a digital-only configuration (with no SIP
endpoints or analog phones)

Release 4.0

June 20, 2013

Summary of Contents for WAVE IP 2500













































































































































































































































Search results

Summary of Contents for WAVE IP 2500

Reviews:

Related manuals for WAVE IP 2500

Brands by name

Popular brands

Vertical WAVE IP 2500, Installation Manual

Search results

Summary of Contents for WAVE IP 2500

Reviews:

Related manuals for WAVE IP 2500

Brands by name

Popular brands