Vertical Comdial DX-80, Technical Manual

Page: 90 / 322

P
ROGRAMMING
S
YSTEM
F
EATURES
> S
PECIFYING
PC-DBA T
RANSMIT
R
ATE
DX-80 Programming Manual
- 90 -
4. Highlight the Built-in Modem – DIR. No . field and press Enter . Key in the directory number you want to
use for the internal modem, and then press Enter . Valid directory numbers are from those designated for
extension directory numbers. The default is 199.
5. Highlight Built-in Modem – Baud Rate and press Enter to choose either 1200 or 2400 as the operating speed
of the modem. The default is 2400.
6. When you are done, press Esc to return to the Database Programming screen. The system prompts: “Exit
This Feature?”; press Y for yes.
7. The system prompts “Save Current Setting?” Press Y to save your changes.
8. The system then prompts “File Exists, Override?” Press Y to continue with the save operation.
9. Press Esc to return to the Database Programming menu.
10. When you have finished all programming changes, perform a Send operation to copy your new database to
the DX-80 switch system memory. For more details, see Section 2.1.4.4, F4 – Send .
4.15 Specifying PC-DBA Transmit Rate
The DX-80 system allows you to remotely program the DX-80 using PC-DBA on a laptop. You must set the trans-
mission rate for this communication between the switch and your laptop.
4.15.1 PROGRAMMING USING THE DET
Note: chg , bksp , save , one , always , del , and ack are interactive LCD button operations. Use the three buttons
below the LCD display to actuate the associated operation.
1. Enter Database Administration using the feature code Feature # * and then enter the admin password .
2. Press show . The system displays the DB Item Select screen.
3. Enter 04-16 and press save . This advances you to the RTM X RATE field.
4. Press chg to select the transmission rate between your laptop and the DX-80 switch. Valid choices include
1200, 2400, 4800, 9800, and 19200. The default is 9600.
5. Press save .