Vertical Comdial DX-80, Technical Manual

Page: 80 / 322

P
ROGRAMMING
S
YSTEM
F
EATURES
> C
ONTROLLING THE
N
UMBER OF
C
ALLER
ID E
NTRIES IN THE
CID T
ABLE
DX-80
- 80 -
4.9 Controlling the Number of Caller ID Entries in the CID Table
The system stores caller identification information for up to 100 calls, per tenant group, in the CID (Caller ID)
table. You can control how many entries (names/numbers) are in this table.
4.9.1 PROGRAMMING USING THE DET
Note: chg , bksp , save , one , always , del , and ack are interactive LCD button operations. Use the three buttons
below the LCD display to actuate the associated operation.
1. Enter Database Administration using the feature code Feature # * and then enter the DB Admin password .
2. Press show . The system displays the DB Item Select screen.
3. Enter 04-09 , then press save .
4. Press show , which advances you to the Assignment for CID Name Table screen. You can decrease or
increase (if there is sufficient room) the number of caller ID names in the table.
5. Enter 04-10-1-01 and press save if you want to add to the number of Caller ID numbers allowed for tenant
group 1. The system then automatically increases the amount of caller ID names allowed, counting by 10.
The range of allowable speed dials is 0 to 100. The default is 100.
Or,
Enter 04-10-1-02 and press save if you want to reduce the number of Caller ID numbers allowed for tenant
group 1. The system then automatically decreases the amount of caller ID names allowed, counting by 10.
6. Enter 04-11-1-01 and press save if you want to add to the number of Caller ID numbers allowed for tenant
group 2.
Or,
Enter 04-11-1-02 and press save if you want to reduce the number of Caller ID numbers allowed for tenant
group 2.
7. Enter 04-12-1-01 and press save if you want to add to the number of Caller ID numbers allowed for tenant
group 3.
Or,
Enter 04-12-1-02 and press save if you want to reduce the number of Caller ID numbers allowed for tenant
group 3.
8. Press the Hold button to return to the previous menu level,
Or, press the Volume button (up or down) to return to the DB Item Selection screen,
Or, exit programming.
4.9.2 PROGRAMMING USING PC-DBA
1. Select Programming from the PC-DBA menu and press Enter . The system displays the Database Program-
ming menu.
2. Highlight System Resource and press Enter . The system displays the System Resource — CID Name Table
Assignment screen.