Vertical Comdial DX-80, Technical Manual, Page: 48 / 322

G
ETTING
S
TARTED
> S
HORTCUTS TO
H
ELP
Y
OU
W
ORK
F
ASTER
DX-80 Programming Manual
- 48 -
2. The system places the cursor in the Source DIR No . field. Key in the CO line directory number you want to
use as a baseline, and press Enter . Valid directory numbers are 740 through 755. There is no default. Once
you enter a valid CO group number, the system moves you to the Destination DIR No. field.
3. Enter the CO group number you want to copy the baseline’s programming into (9 and 800 through 806) and
press Enter . Once you enter a valid CO group number, the system accepts that number and scrolls down a
line to allow you to enter another CO group number into which you want to copy the baseline’s program-
ming.
Note : If you enter an invalid number, the system erases your input.
4. In the same manner, enter any other CO group numbers as needed. When you are finished copying the set-
ups, press Esc . The system then performs the CO group copy that you specified, and returns you to the Sys-
tem Application — CO Line Copy Group menu.
5. If needed, you can enter another source CO line directory number to copy from, and continue the process
for other CO groups.
6. When you are done, press Esc to return to the Database Programming screen. The system prompts: “Exit
This Feature?”; press Y for yes.
7. The system prompts “Save Current Setting?” Press Y to save your changes.
8. The system then prompts “File Exists, Override?” Press Y to continue with the save operation.
9. Press Esc to return to the Database Programming menu.
10. When you have finished all programming changes, perform a Send operation to copy your new database to
the DX-80 switch system memory. For more details, see Section 2.1.4.4, F4 – Send .
3.1.3 COPYING BASELINE EXTENSION SETUPS
You can use this database feature to quickly copy the various programming and settings for one extension to other
extensions. There are two methods to copy extension data:
• individual—copies from the baseline extension to another extension, one at a time;
• group—copies from the baseline extension to all extensions in a pick up group.
The following conditions apply to copying extension programming.
• You must complete all the programming for the baseline extension before making a copy. For details on how
to program an extension, see Section 10, Programming Extensions .