Vertical Comdial DX-80, Technical Manual

Page: 37 / 322

- 37 -
DX-80 Programming Manual
P
ROGRAMMING
O
PTIONS
> U
SING
PC-D
ATABASE
A
DMINISTRATION
(PC-DBA)
Since PC-DBA programming operates on the database on the PC laptop working directory only, you must send this
information to the DX-80 system memory before it is operational on the switch.
To send data, press F4. The system displays the Send options.
+------------------+
¦ Send Request ¦
+------------------¦
¦ * Send All ¦
¦ * Send Part ¦
¦ * Send Item ¦
+------------------+
Use the arrow keys to select from list the send technique you want to use. If you select Send All , the system starts
the data exchange immediately. If you select Send Part or Send Item , you must chose either the specific data item
(item) or data category (part) you wish to send. Use the arrow keys to select from the menus provided with these
two functions.
2.1.4.5 F5 – Connect
Once you make a physical connection (cable or modem) between the PC and the DX-80 system, you must link the
two devices using the F5-Connect function key.
1. Press F5. If an adequate connection exists between the DX-80 system and the PC, the system responds as
follows.
+----------------------------------------------------------------------+
¦ Connect ¦
+----------------------------------------------------------------------¦
¦ (1) : Receive Data From KSU ¦
¦ (2) : Don't Receive Data From KSU ¦
¦ Please Select : ¦
¦ Note : To select (1) will receive [Numbering Plan],[Ext DIR No.] ¦
¦ [CO Group DIR No.],[User Password] from KSU automatically, ¦
¦ so these data you set previously on PC will be lost. ¦
¦ To select (2), the data about 'DIR No.','User Password' on ¦
¦ PC may be inconsistent with KSU. ¦
+----------------------------------------------------------------------+
Select 1 to receive the database items listed at the time of connection.
Select 2 to connect to the system processor without an automatic data receive operation.
2. Once you make your selection, the system prompts you to enter the Database Administration password.
+--------------------------------+
¦ Connect ¦
CAUTION
It is recommended that if you are making database changes to a system
that has been in operation for an extended period of time, that you per-
form a Receive All operation prior to making any database changes.
Since some database fields (including Speed Dial and Service Mode) are user adjustable,
these fields will be overwritten if you perform a Send All operation using an outdated
PC-DBA laptop database.