Vertical Comdial DX-80, Technical Manual

Page: 241 / 322

- 241 -
DX-80 Programming Manual
P
ROGRAMMING
V
OICE
M
AIL
> P
ROGRAMMING
T
HIRD
P
ARTY
VM, A
NALOG
P
ORTS
1. Highlight Voice Mail Table , and press Enter . Choose the tenant group you want to program, and press
Enter. The system displays the Extension Application—Voice Mail Table: Tenant x menu.
2. Set the voice mail table to reference the UCD group you want to use for the voice mail ports. Highlight VM
Hunt Group and press Enter to select UCD group number 24.
3. Highlight ICM/VM Button and press Enter . Key in the prefix numbers you want the system to use when
identifying a call as originating at the mailbox owner’s phone. Valid codes can include digits 0-9, *, #, and
letters A - D. The default is #2.
4. Highlight Transfer and press Enter . Key in the prefix numbers you want the system to use to identify a call
as transferred to mailbox. Valid codes can include digits 0-9, *, #, and letters A - D. The default is #1.
5. Highlight Busy Forward and press Enter . Key in the prefix numbers you want the system to use to identify
a call as forwarded from a busy mailbox, and press Enter . Valid codes can include digits 0-9, *, #, and let-
ters A - D. The default is #3.
6. Highlight No_Ans Forward and press Enter . Key in the prefix numbers you want the system to use to iden-
tify a call when forwarded from a mailbox-no answer, and press Enter . Valid codes can include digits 0-9,
*, #, and letters A - D. The default is #4.
7. Highlight Direct Forward and press Enter . Key in the prefix numbers you want the system to use to identify
a call as immediately from this mailbox owner, and press Enter . Valid codes can include digits 0-9, *, #, and
letters A - D. The default is #5.
8. Highlight CO Greeting and press Enter . Key in the prefix numbers you want the system to use to identify a
call as a specific CO line, and press Enter . Valid codes can include digits 0-9, *, #, and letters A - D. The
default is #6.
9. Highlight CO Recall and press Enter . Key in the prefix numbers you want the system to use to identify a
call as a specific CO line recalling, and press Enter . Valid codes can include digits 0-9, *, #, and letters A -
D. The default is #9.
10. Highlight UCD Overflow and press Enter . Key in the prefix numbers you want the system to use to identify
a call as a UCD Overflow Announcement, and press Enter . Valid options include any valid extensions on
the sytem. The default is 300.