Vertical Comdial DX-80, Technical Manual

Page: 183 / 322

- 183 -
DX-80 Programming Manual
P
ROGRAMMING
C
ALL
H
ANDLING
> P
ROGRAMMING
C
ALLER
ID C
ODES
& L
OCAL
8. Press Esc to return to the Database Programming menu.
9. When you have finished all programming changes, perform a Send operation to copy your new database to
the DX-80 switch system memory. For more details, see Section 2.1.4.4, F4 – Send .
6.25 Programming Caller ID Codes & Local Calling Areas
The system stores caller identification information for 100 calls in a call table. While reviewing the calls, you will
have the option to dial the number, obtain more information for the particular call, or delete the call.
The following conditions apply when programming the caller ID table.
• You must properly program the local area code and long distance prefix so the system can accurately redial
the CID number from the caller ID table.
• If no name is delivered from the telephone company, the system displays the number only.
• Any digital speakerphone user can review the caller ID table if the attendant password is known, but the table
can be reviewed by only one telephone at a time.
• You can exit the caller ID call table mode at any time.
When programming the caller ID table, enter the following.
• International prefix (typically not required in the USA or Canada).
• Country code (typically not required in the USA or Canada).
• Long distance prefix (usually 1).
• Local area codes (enter them as the prefix if the local phone company uses 10 digit dialing).