Vertical Comdial DX-80, Technical Manual

Page: 142 / 322

P
ROGRAMMING
C
ALL
H
ANDLING
> P
ROGRAMMING
C
ONFERENCE
C
ALLS
DX-80 Programming Manual
- 142 -
6.2.1 PROGRAMMING USING THE DET
Note: chg , bksp , save , one , always , del , and ack are interactive LCD button operations. Use the three buttons
below the LCD display to actuate the associated operation.
1. Enter Database Administration using the feature code Feature # * and then enter the DB Admin password .
2. Press show . The DB Item Select screen displays.
3. First, program the maximum number of CO lines that may be in a conference. Enter 03-01 .
4. Press chg until the appropriate value displays (NO/2LNS/3LNS). The default is 3 lines.
5. Next, program the Unsupervised Conference Time. At the DB Item Select screen enter 03-38 .
6. Press chg until the Unsupervised Conference Time displays. Valid entries are 0 to 120, in ten minute inter-
vals (0,10,20, 30, etc.). The default is 0, which means unlimited unsupervised conference calls.
7. Next, program the Conference Tone Operation. At DB Item Select screen enter 03-23 . Then press save .
8. Press chg until the appropriate Conference Tone operation displays (Y/N). The default is Y.
9. Exit the programming mode.
6.2.2 PROGRAMMING USING PC-DBA
1. Select Programming from the PC-DBA menu and press Enter . The system displays the Database Program-
ming menu.
2. Use the arrow keys to highlight Call Handling and press Enter . The system displays the Call Handling
menu.
3. First, program the maximum number of CO lines that may be in a conference. Highlight Category 1 and
press Enter . The system displays the Call Handling—Category 1 [1/2] menu.
4. Highlight the CO Line Conference field and press Enter to select No, 2Lines, or 3Lines. The default is 3
lines.