Vertical Comdial DX-80 Technical Manual Download Page 120

Page: 120 / 322

ROGRAMMING

CO L

INES

> S

ETTING

THE

CO L

INE

YPE

DX-80 Programming Manual

- 120 -

5.6.1 PROGRAMMING USING THE DET

Note:

chg

bksp

save

one

always

del

, and

ack

are interactive LCD button operations. Use the three buttons

below the LCD display to actuate the associated operation.

1. Enter Database Administration using the feature code

Feature # *

and then enter the DB Admin password.

2. Press

show

. The DB Item Select screen displays.

3. Enter

02-740~755-08

then press

save

. The CO line type displays for the CO line selected.

4. Press

chg

until the appropriate CO Line Type displays.

5. Press the

Volume

button (up or down) to return to the DB Item Select screen and another CO line number for

programming or exit the program mode.

5.6.2 PROGRAMMING USING PC-DBA

Note:

chg

bksp

save

one

always

del

, and

ack

are interactive LCD button operations. Use the three buttons

below the LCD display to actuate the associated operation.

1. Select

Programming

from the PC-DBA menu and press

Enter

. The system displays the Database Program-

ming menu.

2. Use the arrow keys to highlight

Line

and press

Enter

3. Highlight

Category 1

and press

Enter

. The system displays the CO Line — Category 1 screen.

4. Use

Page Up

Page Down

to select CO Lines 1-8 or 9-16.

5. Highlight the

CO LN Type

field for the CO line you want to program. Press

Enter

to assign CO, PBX,

EMPTY, CO DEV, or PAGE. The default is CO.

6. In the same manner, assign the CO line type for other CO lines as needed.

7. When you are done, press

Esc

to return to the Database Programming screen. The system prompts: “Exit

This Feature?”; press

for yes.

8. The system prompts “Save Current Setting?” Press

to save your changes.

9. The system then prompts “File Exists, Override?” Press

to continue with the save operation.

10. Press

Esc

to return to the Database Programming menu.

Summary of Contents for Comdial DX-80


































































































































































































































































































































Search results

Summary of Contents for Comdial DX-80

Reviews:

Brands by name

Popular brands

Vertical Comdial DX-80, Technical Manual

Search results

Summary of Contents for Comdial DX-80

Reviews:

Brands by name

Popular brands