Vertical 9133i User Manual Download Page 97

Page: 97 / 224

Transfer

Using Wave Phone Features

Wave Phone User Guide

Transferring Calls to Voicemail [ALL]

You can transfer calls directly into voicemail without ringing the destination extension.

DIGITAL PHONES

There are two ways to transfer a call directly to Voicemail via a digital phone:

Via a Dedicated

Transfer to Voice Mail

feature button

This method requires a specially programmed feature button (

Transfer

with the “Direct Transfer

to Voice Mail” option selected). Contact your System Administrator to find out if this feature is
available on your Wave digital phone.

To Transfer Calls to Voicemail via a Transfer to Voice Mail feature button

While on a call:

Press the pre-programmed

Transfer to Voice Mail

feature button to place the

active call on hold.

Enter the destination extension number,

Press a DSS/BLF button that has been configured for a specific extension.
The caller is transferred; you may hang up.

Via the standard Transfer feature button

Use this option if a

Transfer to Voice Mail

feature button has not been configured on your phone.

To Transfer Calls to Voicemail via the standard Transfer button

While on a call:

Press the

TRNS/CONF

button to place the active call on hold.

Press the fixed

MESSAGE

button or a programmed

Message Waiting

button.

Enter the destination extension number,

Press a DSS/BLF button that has been configured for a specific extension.
The caller is transferred; you may hang up.

Wave 4.0

June 2013

Summary of Contents for 9133i

































































































































































































































Search results

Summary of Contents for 9133i

Reviews:

Brands by name

Popular brands

Vertical 9133i, User Manual

Search results

Summary of Contents for 9133i

Reviews:

Brands by name

Popular brands