Transfer
3
-
65
Using Wave Phone Features
Wave Phone User Guide
ANALOG PHONES
To Make a Blind Transfer
While on a call:
1.
Press
Flash
, then 1.
2.
Listen for the prompt to assist you with making the transfer.
3.
Dial the destination extension.
4.
Hang up to complete the transfer.
Making a Supervised Transfer [ALL]
A supervised transfer lets you announce a call before completing the transfer.
SIP PHONES
To Make a Supervised Transfer
While on a call:
1.
Press
Transfer
(
) to place the caller on hold.
On some models, there is an
XFER
softkey.
2.
Listen for the dial tone, then enter the destination extension number.
When the destination party answers:
3.
Announce the call.
4.
Press
Transfer
(
), or hang up to complete the transfer.
Note:
For the 55i and 57i SIP phones, although the Xfer softkey is displayed when the
phone goes off-hook, transfer is not supported when the phone is in the dialing state.
To Cancel the Transfer
Press
End Call
to reconnect to the calling party.
•
For 480i/CT, 9480i/CT, and all Aastra Series 5 models: press
Goodbye
(
) or
use the
DROP
softkey.
Hint:
Models 480i/CT, 9480i/CT, 9133i, 9143 and all Aastra Series 5 models: you can use
the L2 button to make this transfer.
Note:
A Transfer can become a Conference by pressing
Conference
(
) after the
second party answers.
Wave 4.0
June 2013
