manualshive.com logo in svg

Vertical 9133i, User Manual

Share
Download
Vertical 9133i User Manual Download Page 70

Hold

3

-

40

Using Wave Phone Features

Wave Phone User Guide

To Unpair the Bluetooth®

Follow steps 1 and 2 above, then in step 3, select 2 to “unpair” the Bluetooth® device. The 
system will search for the device and, if successful, a “

DEVICE DE-REGISTERED

” will be 

displayed.

Hold

You can place a call on hold to keep the other party connected while you hang up the handset 
or use other phone features.

Station With or Without a Call or Line Appearance

Station without Call Appearance OR Line Appearance

1.

Place call on hold (primary line) 

2.

On-hook handset 

3.

Off-hook handset 

4.

Call is reconnected (automatically) 

Station with Call Appearance

1.

Place call on hold (primary line) 

2.

On-hook handset 

3.

Off-hook handset 

4.

Call Appearance line is selected (call is not reconnected automatically) 

Station with Line Appearance

1.

Place call on hold (primary line) 

2.

On-hook handset 

3.

Off-hook handset 

4.

Call is reconnected (automatically) 

Station with Line Appearance

1.

Place call on hold (line appearance line) 

2.

On-hook handset 

3.

Off-hook handset 

4.

Primary line is selected (call is not reconnected automatically) 

Wave 4.0

June 2013

Summary of Contents for 9133i

































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands