Vertical 9133i User Manual Download

Page: 47 / 224

Call Waiting

Using Wave Phone Features

Wave Phone User Guide

SIP PHONES

The L2 button on each model serves as the call waiting indicator. Also, models 480i/CT and
9480i/CT has two softkeys

PICKUP

and

IGNORE

Pressing the

PICKUP

sofkey button is equivalent to the L2 button; it will connect you to the new

call (and place the existing call on hold). However, pressing the

IGNORE

softkey sends the

incoming call directly to voicemail.

To accept a call waiting call

Press

(or the

PICKUP

softkey on models 480i/CT, 9480i/CT & Aastra Series

5).

The initial call is placed on temporary hold. The corresponding primary line button LED
blinks, and the L2 LED lights (solid).

Hint:

Remember, on models 480i/CT, 9480i/CT, and Aastra Series 5 you can also press

Ignore

to send the incoming call directly to voicemail.

To reconnect to the initial call

Press your primary line button.

The call that was waiting is placed on temporary hold. The Call Waiting LED flickers,
and the corresponding primary line LED lights.

You can toggle back and forth between the initial call and the call waiting call by pressing
the primary line button and the

Call Waiting

button. The LEDs and display update to

reflect which caller is connected.

To release the call waiting call

While the Call Waiting call is active, press End Call.

•

For models 480i/CT, 9480i/CT, and all Aastra Series 5: press

Goodbye

(

or use

the

DROP

softkey.

The call waiting call is dropped and you are reconnected to the initial call.

Wave 4.0

June 2013

Summary of Contents for 9133i

































































































































































































































Search results

Summary of Contents for 9133i

Reviews:

Related manuals for 9133i

Brands by name

Popular brands

Vertical 9133i, User Manual

Search results

Summary of Contents for 9133i

Reviews:

Related manuals for 9133i

Brands by name

Popular brands