Mute
3
-
40
Using Wave Phone Features
Wave Phone User Guide
Mute
This feature allows you to prevent the caller at the distant end to hear anything through your
microphone or handset during a call.
Note:
If the Mute is enabled (on)via the speaker, it will be disabled (off) if you lift the handset
Muting a Call [S] / [D]
SIP & DIGITAL PHONES
To mute a call
While on a call:
Press MUTE (
) to mute the microphone or handset.
The
MUTE
LED is solid red. You can hear the other party, but the other party cannot hear
you.
If you are on a hands-free call, the
SPEAKER
LED is solid red.
To speak to your caller
Press
MUTE
(
)
again.
The
MUTE
LED will be cleared.
Night Answer
By using the Night Answer feature, you can manually place an Vertical Wave system into a
mode where all inbound calls to the Vertical Wave system are redirected to a predetermined
destination. Your system administrator can configure any on- or off-premise phone number as
the destination.
Setting Night Answer [ALL]
SIP & ANALOG PHONES
To turn on the Night Answer Service
Press *85.
To turn off the Night Answer Service
Press *86.
