Basic Phone Handling
2
-
9
Basic Operation
Wave Phone User Guide
Answering Calls
Aside from using the handset or speakerphone (when available), the operation of the Wave
phones is quite basic. The main functions you’ll probably be using are:
•
Using the Hold feature
•
Using the Call Waiting, Call Park, Pickup, and Transferring features
Using the Hold Feature
You can place calls on hold and place a new call, switch between calls on hold, and end a call
without losing other calls on hold.
To place your current call on hold and place a new call
1.
Press
Flash #
to place the current call on hold.
You will hear a dial tone.
2.
Dial your call.
Using the Call Waiting, Call Park, Pickup, and Transferring Features
These features are used slightly differently on each phone type (SIP, Digital, and Analog). You
can find these Wave phone features in Chapter 3 listed alphabetically and each feature shows
each phone type.
While on a call
1.
Press
TRANS/CONF
.
2.
Dial the extension or press
DSS
.
3.
Hang up to complete the operation.
Switching Between Calls
You can switch (or toggle) between calls that you have on hold. You can answer calls, make
calls, and transfer calls without losing other calls by using the Hold feature to switch between
the various calls.
To switch (toggle) from your current call to a call that is on hold
Press
Flash
4.
If you have multiple calls on hold, you will hear a menu from which you can select the
call to which you want to connect.
