8
2015/3/9V1.0+V1.0
2.4. Level Adjustment
The treadmill will wobble during workout and the incline angles will be affected if it is placed
on uneven ground.
The level adjustment method is as follows:
1
Turn A anticlockwise to loosen it
2
Adjust B to the proper height
3
Turn A clockwise to tighten it.
4
The left side adjustment method is same as the right side.
2.5. Power Switch
The Power Switch is on the bottom panel of the treadmill. 1 means on, 0 means off.
2.6. Running Belt Adjustment
After assembling the treadmill, check the operation of the running belt.
First, make sure the power supply is correct. After starting the treadmill, stand on the two
sides of t
he pedal(At the very start, don’t stand on the running belt).Press QUICK START
key and then increase the speed to 4.0MPH(6.4KPH) by pr key.
If the running belt is moving towards the right side
：
Turn the right button 90°clockwise and the left button anticlockwise 90°. You will find the
belt return to the center position automatically.
If the running belt is moving towards the left side
：
Turn the left button 90°clockwise and the right button anticlockwise 90°. You can also find
the treadmill return to the center position automatically.
If you find that the belt has not moved to the proper position, please repeat the steps above.
Note
：
When adjusting the button, the angle can not exceed 90° which will make it
impossible to adjust the belt to the proper position.
