42
2015/2/25V1.0+V1.0
MCU UPDATE
：
Update for I/O program, please refer to the file about the update for
software for details.
Media UPDATE
：
Update for the visual reality film, please refer to the file about the
update for software for details.
BG S
ervice
UPDATE
：
Update backend service, please refer to the file about the
update for software for details.
8.10.
Value Setting
Max Setting
：
Modify the peak data of speed and frequency accuracy for all kinds of
speed.
Incline Setting
：
Modify the stage of incline, and the lowest and highest position.
Incline abs
：
Test the action and data of the incline position timely.
※
After setting, please do not modify the data which will affect the best setting.
8.11.
Debug Log
Scan the condition of the orders during operation of the machine to check the process and
possible factor of the problem.
※
If remote monitoring and analysis is required, please turn on wifi and inform Andriod ID
from 8.2
8.12.
TV Setting
Choose
“local nation” --> choose the TV signal, “ATV” or “DTV” --> Press Quick Scan-->wait
until the channel has been scanned to 100%( about 1 minute) -->it will display the current
channel number which has been scanned successfully) -->after the confirmation
.
If the
“district” and “signal source” is set but “channel scanning” is not executed, the
function of entrance to TV is valid but there is only bland channel or irrelative channel,
so we recommend that the channel scanning should be done.
If scanning failed or the channel page did not show out, please execute Quick Scan
again, try more times. If failed again, please press Deep Scan, then the system will
execute more frequent scanning, but the scanning will take long time.
“ATV” and “DTV” cannot coexist at the same time, when the signal change, please set
and scan again.
After scanning, the some channel can be executed as
“ locked channel” and this
