8/26/10
PEP2000
This procedure is used to update Main CPU Ver.
0152
and EDSP Ver.
11.54
the
flash programming for the FT-2000/D Transceivers.
We recommend installing the Flash Programming Software on a PC computer with Windows 2000,
XP or Vista Operating System; and use the CT
-
119 programming cable or 8-pin mini
-
DIN PGM
-
SW
(P0091526) and serial cable RS
-
232C, DB9F to DB9F straight cable.
NOTE:
There are many USB adapters available; however some may not function with this software.
We recommend using the latest USB adapter driver software when available.
If the CT
-
119 programming cable or is not available you will need a RS
-
232C, DB9F to DB9F
straight cable and 8pin mini
-
DIN PGM
-
SW (P0091526). If the DIN PGM-SW is not available you
will need to operate the internal program switch S3004. Please follow the instructions in
ADDENDUM: Page 7 and 9.
The software versions can be displayed on the radio
While holding the three buttons [GEN]
＋
[50]
＋
[ENT] turn the radio on. The software version will be
displayed in the VFO-A window for 5 seconds then the radio will start up in normal operation.
See below:
Example EDSP V11.53 and MAIN V0150 software version.
*If you already have
EDSP
V11.54
and MAIN
V0152
software versions,
it is not necessary to update the FT
-
2000/D again.
The software updates will work with all versions (AF, AS, EU, NA, OC, SA or all Countries) of the
FT-2000 and FT-2000D.
The update software is available from our website at
http://www.yaesu.com
. The CT
-
119
programming cable is available from your authorized Vertex Standard dealer. You may also order
by email to Vertex Standard parts department,
.
Main CPU:
Software version
01XX
(This image & version is for
illustration only)
EDSP:
Software version
11.XX
(This image & version is for
illustration only)
