41
SG71070M
Revision A3
Port
The switch port number of the corresponding STP CIST (and MSTI) port.
Global Profile Mode
Enable/Disable the Global IPMC Profile.
System starts to do filtering based on profile settings only when the global profile mode is
enabled.
Delete
Check to delete the entry.
The designated entry will be deleted during the next save.
Profile Name
The name used for indexing the profile table.
Each entry has the unique name which is composed of at maximum 16 alphabetic and
numeric characters. At least one alphabet must be present.
Profile Description
Additional description, which is composed of at maximum 64 alphabetic and numeric
characters, about the profile.
No blank or space characters are permitted as part of description. Use "_" or "-" to separate
the description sentence.
Rule
When the profile is created, click the edit button to enter the rule setting page of the
designated profile. Summary about the designated profile will be shown by clicking the view
button. You can manage or inspect the rules of the designated profile by using the following
buttons:
: Adjust the rules associated with the designated profile.
Buttons
Add New IPMC Profile – Click to add new IPMC profile. Specify the name and configure the
new entry. Click "Save".
Apply – Click to save changes.
Reset – Click to undo any changes made locally and revert to previously saved values.
2-7.1.1 IPMC Profile Rule Settings Table
This page provides the filtering rule settings for a specific IPMC profile. It displays the
configured rule entries in precedence order. First rule entry has highest priority in lookup, while
the last rule entry has lowest priority in lookup.
Profile Name
The name of the designated profile to be associated. This field is not editable.
Entry Name
The name used in specifying the address range used for this rule.
Only the existing profile address entries will be chosen in the selected box. This field is not
allowed to be selected as none ("-") while the Rule Settings Table is committed.
Address Range
The corresponding address range of the selected profile entry. This field is not editable and